|
FYI
Quote:
Originally Posted by Jooseppi Luna
I've spent as much time on this one valve as I have on four other cylinders. I'm turning the nuts toward the left of the picture below (looking from the driver's-side, turning towards the timing chain). I've loosened it this much several times and it's STILL too tight (.35 mm is the exhaust spec I'm using).
What is going on? Am I turning it in the wrong direction? Something else wrong? It is loose enough for the intake specs -- so it's not crazy tight -- but this is an exhaust valve.
 |
You have a private message.
.
__________________
ASE Master Mechanic
Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer
1985 300SD
1983 300D
https://www.boldegoist.com/
|