You won't believe how I'm going to run the exhaust on the S-10 - THRU the RF fender! Remember, this is a race truck. So I'll run the flex joint off the turbo and the factory head pipe turned about 90* then thru a hole I'll drill in the sheetmetal. It may need a little more bend in it - I'll have to mock it up to see where it falls. Pics when I get that in place.

The tricky part about my set-up is that I'll have to be careful to cool off the engine before I shut off the engine so I don't fry the valves. I have to idle back to the pits after the run anyhow so I expect that the exhaust temp will drop to safe levels as I drive.

Dan