Quote:
Originally Posted by mach4
Also I recommend the Meyle mounts... the way the flashing remains from their manufacturing process leaves an almost perfect void into which you can pour your urethane. With other mounts there is no flashing and you'll need to figure out how to seal up the "side" of the mounts....
...the ram on a 2 ton bottle jack that you'll remove and throw away, is the perfect size to shove in the bolt hole to seal that up and cast a nice bolt hole. Cut in half - one for each mount.
See this link for more details - http://www.peachparts.com/shopforum/3061724-post317.html |
Fascinating information, I do appreciate all that. So I'm curious if by any chance you might know, off hand, if any other "cheap" brands that may have similar manufacturing process/design leaving similar flashing? Or a source for said brand? Second question, any / all brand(s) of 2 ton bottle jack has the same size ram?
Did you use One Step Release Agent & Sealer from Reynolds, or is there another product you have used/would recommend, please?
tia, best regards
tia, best regards