Quote:
Originally Posted by 97 SL320
Check the shifter bushings.
If the trans isn't fully in park, the ignition lock won't release the key. Any, the foot brake pedal must be UP to complete the release. There is a cable that runs from the trans to a lever on the brake pedal then to the ignition lock.
You might have other issues but that is a start.
|
I think the problem us definitely in the tumbler. If I wiggle it around enough it comes out. If I only cycle the key without cranking the engine it will pop right out. If I start the engine, turn it off without moving the shifter out of P it still wont come out without some effort. If I try to remove it with the shifter in any gear other than P it won't come out no matter what. As far as I can tell the shifter has no pay in it. I'll remove the tumbler and take a look at it. Maybe try some dry lubricant.