Remove the nut, think it is a 8mm. If you have a 1/4" ratchet and extension it should fit from the top. been a while since I removed one.

Once the nut is removed the sensor should pull straight up. The Stud the Nut screws onto stays with the Bracket, and it is mounted to the engine.

It might be a slight struggle to get it to move with the dirt, oil and ??? holding it tight.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works