Hi there guys!

I'm running into a head-banging problem with a brake job.

I have successfully replaced my pads on the rear of the car and bled the passenger side with no problem (using a mityvac). On the drivers side I can't pull OR push (with the pedal) fluid through. I bypassed the caliper and hooked the pump directly to the metal brake like, and I still cant pull any fluid. the pump wont build vaccuum either. I know its one line that tee's off for both rear brakes, I can't understand why one side works and the other doesnt! any help would be greatly appreciated. I dont see any evidence of damage to the tee fitting, but there's no fluid running out when I disconnect the metal line.

Any help would be greatly appreciated.

Cheers
Sean