Quote:
Originally Posted by DieselPaul
Unplug the vacuum line going into the fuel pressure regulator, see if its wet with the fuel. Seen more than a couple fail on 60*s.
|
I did that a few days ago and it was bone-dry... and then I realized that I would probably be better off doing it right after running the car, and not when it's been sitting for a few days. So I'll do it again today.
Quote:
Originally Posted by SwampYankee
I think you're overlooking the easiest fix.
Dye your hair grey and drive around 15 mph under the speed limit with your left blinker on for the entire day. As Buick intended.
|
Quote:
Originally Posted by kmaysob
i would place my bet on o2 sensors. a sensor can often be "lazy". you have to remember, this is an obd1 car. obd 1 is a whole lot dumber. does the coolant temp read properly on the dash?
if the temp is not reading correctly, it could be failing to go into closed loop mode. hence the raw fuel smell. you really are working blindly without a scan tool that has live data mode.
|
Quote:
Originally Posted by DieselPaul
His car should have a 7730 which is a pretty decent ecu for OBD1 american cars.
Does your car have a temp gauge? I had a thermostat stuck open on a Fiero with a 60* and it would never go into closed loop.
|
I'll check & see what the FSM says about the O2.
The car has a temp gauge, and the temp is absolutely spot-on.
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____
"Your sense of humor is still loco...
" -MBeige ____
"Señor Luna, your sense of humor is quite järjetön" -Delibes
1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod
2 Samuel 12:13: "
David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die."