Ouch! I have been searching (in vain) beneath the master cylinder. I didn't realize the possibility of the second area on the side of the transmission. I had to unbolt the filler tube when removing the air intake manifold and that was moved around quite a bit during the carburetor replacement but I have a feeling this little linkage arm would be on the driver's side somewhere. The linkage appears to go into a recess in the firewall. Do you know if there is a way to reach it from inside the footwell (above the pedals)?

I knew this car was going to need a lot of work but just not in the ways it has turned out so far. I am quickly learning these cars are simple, to a degree, but demand your respect. Thanks again!

- Dave