As far as for the leak on the pan I got about 2 qts. out of the pan and about 2 out of the converterter and keep plenty of newspaper underneath as it will drip for days yet with no pan on. On install with new gasket and proper torqueing 6' lbs. on refill and startup it dripped immediately. Took pan back off put a straight edge on it and it looked to be warped so I procedded to try to straighten on reinstall I put some sealant on area where it was leaking which was where rubber gasket meets pan did not leak at all on top side where gasket meets trans. Put a little over 6 qts. Back in and does not seem to be leaking any more will continue to monitor it hoping problem is solved.