Quote:
Originally Posted by tinypanzer
Good news. How did you determine this to be the cause? Did you swap it, or measure it? I was just going to post that some meters don't measure AC well when it isn't 60hz...
|
The problem was no spark so I removed the crank sensor and clamped the sensor in a vise and a portable electric drill rotating at the sensor then I got AC voltage and when I tapping on the vise the signal got lost, and when tapping vise again the signal came back. The OVP relay is also a culprit and the symptom is the same but i had a brand new one so I ruled out the OVP relay.