Originally Posted by strelnik

I have two complete set-ups from the Air Force that were roll-on, roll-off oil separators and centrifuges. May also include some treatment equipment, have not completely reviewed all the documents yet from Northrop Grumman.

Have decided to sell one set-up and one pump since I'm not going to do fuel processing at two locations, too much work.

I also have a couple of Schroeder high-volume true 6 micron pumps with dual filter units. Navy uses these to filter waste oil for re-use in marine diesels. Speed is max 1.6 gallons per minute, but I wouldn't filter at that speed.

Each of these units is independent, depends if you want to filter or centrifuge or both!

Am getting ready to acquire an EPA-approved storage tank that holds 385 gallons, then connect it to one of the processors and take my time filtering and re-filtering.

But I have two Schroeder portable units and two Air Force roll-aroiund units. I guess they used to roll them onto a plane, do the filter/centrifuge thing, clean them up and roll them to their next porocessing location.
Here's some pics.