Quote:
Originally Posted by Sbucha
I don't have the tools to pressure check. I cleaned every surface very well and found no damage. I ordered another seal and I'm going to try to soak it in a transmission stop leak fluid before installing.
|
I don't know if it is true but I have been told the Stop Leak makes the Seals swell.
If that is the case the O-ring is going to swell and make it hard to get the O-ring and Cover Plate Installed.
Your Transmission has a Pump Working Pressure and a Modulated Pressure that can be checked.
The obvious thought would be that something it causeing too much pressure inside of the Trans. Meaning some passage could be blocked or some Valve Stuck.