I obtained a Diagnostic Code Reader and connected it to my 16 pin set-up. I did NOT get any flashing lights from Socket 6 for the SRS system.

I then disconnected the red connector under the driver's seat and retested to see if I received a code (flashing lights from the reader). I did NOT receive any lights at all and the SRS and ABS light in the cluster never come on at all (no pre-check).

I know the bulbs in the cluster for ABS and SRS worked since my original problem was that the SRS light was always on for the past week.

Any other tests I can perform? What can be wrong? Thanks.