Quote:
Originally Posted by crackerjack
fr
located the OVP. there was corrosion all over the fuse. replaced the fuse and cleaned it all up. hope this solves the problem for the long run. Thanks again for your help.
|
If the OVP was showing external corrosion, it should be replaced.
This device controls power routing to critical items, ECM, fuel pump, crank position signal, etc.
Check the part number on yours, to verify it has not been superseded due to various issues.
I have attached the OVP list for your car.
.
__________________
ASE Master Mechanic
Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer
1985 300SD
1983 300D
https://www.boldegoist.com/