Easy breezy..

I can't recall how hard the bolts on top of the bell housing are to get to, I think you can get to them from the top rear of the engine on a four cylinder. Make sure you pull the transmission straight off, pull it at an angle and the pressure plate will catch and the whole thing will get stuck. I had to use a big pry bar to break the pressure plate just to get the tranny off. But this was at a junkyard without the proper setup.

__________________
08 R320 CDI current

Past
95 E420
87 300D Turbo 5spd
90 300TE
83 300SD
85 300TD
92 400E
85 190D