|
More snappies
ou can see the 2nd shim set. Reverse order as the 1st. Again, no clue what or why these are in there.
The inner ram one had one sliding piece attached to it.
The aluminum ring off the ram has an O-ring and a nylon insert. I suspect this will be tackled latter since I cannot gouge these at all.
Here's a layout of the pieces. Pretty straight foward overall.
and a close up of the inner piston (lower)
Currently, I am cleaning up what I got apart at this juncture. I will try to figure out if there is a way to repair the main steel tube. That was a dumb mistake.
Assuming the "piston rings" are fine, then rebuilding these things appears really simple overall.
|