Quote:
Originally Posted by sshine412
The alarm is the original Becker that came with the vehicle and as for the FPR. I know it was changed once. I know where it is located, but how to I check the amps (which pins and readings)?
@ Two560Two - The door panel to the alarm system is on the passenger side floor panel against front wall (basically if there was a glove box it would be located underneath). There is an access panel with a 8 or 10 mm nut.
|
Two of the most basic things may be happening. No spark or no fuel. It's easy enough to check the fuelpump without doing much other than checking to see if the fuel pump is running while cranking. Just look just inside of the right rear wheel to check. If it isn't running, you may want to want to jump #87 and 30 where the FP relay plugs in. If it still doesn't run you can check for power at the FP terminals to rule out if it's bad or not. If it runs, you may want to move on to the spark....