Quote:
Originally Posted by link
Theoretically you could put a sleeve on the screw and re cut the rack side interface to fit the new sleeve diameter. You may be able to use some type of epoxy or quick dry urethane on the rack side interface and then let the screw threads re-tap the freshly made surface. I have no idea how long this would last but some urethanes are very strong.
|
In the worst case before getting a new rack I could use JB weld or silicone and see if that works. The rack is a rebuild one, installed it little over a year ago...
__________________
1979 Black on Black, 300CD (sold), 1990 Black 300SE, Silver 1989 Volvo 780, 1988 300CE (vanished by the hands of a girlfriend), 1992 300CE (Rescue).
|