Quote:
Originally Posted by Rick76
If you disconnect the motor wires at the terminal block and hook 12 volts to them the CCM should no longer be connected so it should not click.
|
The caveat here is that the 12v power I used was the two leads that feed the switch itself, and I'm assuming they come out/through the CCM itself...so...
.
I've taken the motor apart now and am cleaning everything up and will put it back together and see if that helps. Fingers crossed.
Also have new fuses on order to just go ahead and replace all of them and clean up the contacts in the fuse box. Just last night the wipers stopped and it was fuse #2. A jiggle and a wiggle and they worked again. That has since been replaced.