Quote:
Originally Posted by ccrelan
I know David Hendy can walk you through this. Do you have the all the other pieces from the car other than the seats? If not, the 95 wagon he got last week was a fully spec'd car with heated seats. I would think you would need the console wood with switches and door modules.
|
I have the console wood and most of the remaining trim but I wasn't planning on using the bun warmers. I have them in my F150 and seldom use them plus this car is never going to be driven in weather thats cold enough to need them (I hope)
Quote:
Originally Posted by babymog
The '91 has the same convenience module, wiring, switches, and connectors as the '95 IIRC, should be a direct swap if you're not adding the bun-warmer wiring. Does your '91 have the optional passenger airbag? If not, then you will have an occupancy sensor that you will leave disconnected.
|
No passenger airbag in the 91. The responses I have received both here and on BW confirm it should be a direct plug and play swap. I think there are some differences in 1990 and earlier that would need some modifications to the harness but I should be good.