Thanks for all replies and good advise...I took the least nasty looking of my old injectors apart last night and boiled it in an old turkey fryer that i converted to a hot tank. I used water and dawn dishwasher detergent and left it in there for about three hours. It did a pretty decent job on the grease but the carbon around the inside of the lower half was still there. I followed up with a small brass brush attachment on my dremel to get the carbon off the inside walls of the lower injector half. It came out pretty clean. Gonna follow up tonight with lapping, a soak in lacquer thinner and reassembly.
VStech the MM oil treatment sounds interesting and worth doing while I have the injectors out. I'm assuming I would just add it into the prechambers and let it soak, get a bunch of towels ready and crank the engine over? How much per cylinder should be added?
Oh I also should mention that I'm using that Startron Diesel additive in the hopes that it will eat some of the crap inside the tank.