Remove headlights

01. Open Hood, disconnect positive battery cable (optional). (make sure you have your anti-theft radio code ready)
02. Remove plastic panel below your headlight assembly, it is held in place by a clip (attached to panel) in the inner side of car of the panel.
03. Remove 10mm Bolt on top of headlight (black color)
04. Remove two 10mm nuts on the bottom of headlight (black color)
05. Pull out headlight assembly carefully.
06. Detach bigger harness (7 wire, headlight harness) from headlight, and unplug smaller harness (3 wire, signal) from headlight, put headlight aside.

look for holes or cracks.. and seal them properly.. there has to be a hole thats why there is condensation.. also check your lowbeam + highbeam rubber cover to make sure its tightly fitted.