Originally Posted by mach4

I had a pretty good set of dimensions, but those disappeared about 100k miles ago when I finished my swap.

It would be helpful if you filled out your profile - for example, where are you located? If you happened to be close to San Diego, I've got a "junk" engine you could use/have for measurements and mockup - it's essentially complete, but I'd eventually need to keep stuff like IP, turbo, sump, VP, etc. as spares.

You could also use images as a basis. Take a known measurement like valve cover length or damper diameter and take measurements off the computer screen.

Originally Posted by t walgamuth

I have a spare engine too.