Quote:
Originally Posted by Demothen
I made due with a loaner balljoint press from from a parts store. The big requirement was that you need a very short die that fits the outside diameter of the balljoint with the boot removed.....
The cutout tubing piece that DeliveryValve and charmalu show seems like a nice solution too.
|
With this tool I have, the advantage is it fits the Lemförder balljoint without taking the boot off. It also fits a Meyle joint also.
Quote:
Originally Posted by funola
Nice! Monkeys figured out to use stones to crack nuts. This is a few steps beyond that lol. With that tool, I think you should be able to drive it in with a 3 lb hammer, press not really needed.
|
Maybe, but the press drives it in steady and nicely.
.