Quote:
Originally Posted by optimusprime
Take a picture of how it sits on there and how to put it back . If you look you will see a round taperd peg holding it in The spring will need to go back just as you remove it..And yes it will need to come off to remove the plate. Did you mark the plate before you removed needle ,you have to lift it over the end stop and mark the plate before removal.Failure to do this will mean the speed will be out on assembly. Check out DiselGiant web site for his repair . I think it may have information on Tech Inf at the top of this page .Any questions just ask.Any questions i may help you with ,please PM me.
|
Hi optimusprime, thanks for the reply. Yes i did lift it over the resting post and it did settle in the bottom left (around 7 o'clock position, right on the little black marker). I was lucky as I was following the guide I found on google. It has the recommendation to use a pair of teaspoon and everything. I will take some pictures and go at it again this weekend.