Quote:
Originally Posted by Zulfiqar
I never went so crazy with the torque specs on the different sized schraders, remove, replace and tighten with my little santech tool, one end does standard tiny ones the other end can handle JRA, GM8 and 10mm. - New schraders are always a good idea when servicing a unit.
The valves can be had at oriellys for about 10 dollars a baggie of 8, the tool I got from ebay for about 8 dollars. The orielly baggie would have standard, JRA and 8mm. They also sell a small blister pack of standard cores with caps and their tool for about 5 dollars.
The only port I abhor is the ball loaded one  similar kind is also found on some mercedes low side too. |
+2. I just do finger tight it plus may be another 1/4 turn at most. Space shuttle system, may be. Auto, No.