Quote:
Originally Posted by Mike D
This is a decent starter set.
Bottom-line pricing on FJC KIT6 at ToolTopia.com
It isn't two stage but it does have the additional fitting which allows you to pull vacuum from both ports at the same time. It's not as fast as the true two-stager but it gets the job done.
You will need adapters for the existing R12 fittings.
It has a much higher quality set of gauges with real seals, not the hard plastic pieces of crap HF uses.
If you decide to use the HF manifold, the FIRST thing you need to do is to replace ALL the seals on the manifold. |
I thought the seals on the HF manifold hoses are Teflon. They are white and tend to loosen up during use if you did't tighten them enough. I pressure tested mine to make sure there were no leaks before use.
Where do you buy good quality rubber seals to replace the hard white ones on the HF manifold?