Quote:
Originally Posted by BWhitmore
You might try a hammer and chisel to actually turn the bolt (tap the bolt on the edge with a chisel in the direction to unscrew the bolt). If that fails you can use the chisel to knock the head of the bolt off completely, which would then necessitate drilling out the remainder of the bolt and using a tap to rethread the hole in the water pump. Usually the vac pump can be removed/replaced easily by removing the power steering pump.
|
I think going to take a cold chisel and cut the head off!
Quote:
Originally Posted by ah-kay
Try socket extractor. It is designed for rounded bolt head.
Sears.com |
I don't think I have enough room to get a socket over it, with the fan being attached. I need to invest in a set of these anyway!