Quote:
Originally Posted by ROLLGUY
.......
The fitting welded on the pipe is done on all the 123 Sanden retrofits, so a hose can be connected from that pipe (low side hard pipe going on top of a 616 or 617 in a 123) to the compressor. Check out the PDF installation guide link in my signature.
|
Why can't that low side pipe be eliminated with a -12 hose and -12 fittings with a service port to go between the R4 compressor manifold pipe and the suction hose from the TXV?
__________________
85 300D turbo pristine w 157k when purchased 167,870 July 2025
83 300 D turbo 297K runs great. SOLD!
83 240D 4 spd manual- parted out then junked
|