Quote:
Originally Posted by The Gears
Hi guys
Ykobayshi, Did you by chance try the spring back with a screw driver in the slot before you installed the switch ?
.
|
No. I started the car with the tumbler out with a screwdriver and it had spring back. But with this setup both the column lock mechanism and switch were still in place.
I think you're asking me if I can remember if the screwdriver snapped back even when the switch wasn't installed. While I probably tried this on the bench, I just cannot remember. maybe see on Monday.
Kent must know what he's talking about. After going through my Chinese Neutral Safety Switch ordeal I wouldn't install a made in India switch contractor in that circuit. It carries way too much current to put anything marginal in there. And for all I know the circuit isn't fused.
You've saved a ton of money getting it this far on your own. I think it's time to start throwing money at quality parts. My humble opinion of course.
Good luck.