Quote:
Originally Posted by benusa
It is nice of you to post all the great pictures of various parts and diagrams -- thank you. Is your trans 722.414?
I found this bulletin (if you haven't seen it) attached below.
Pl keep posting p/n and pics -- I'm trying to resolve trans issues on my 300e 2.8 W124 -- it's a gas model - don't know how much is similar - it's 722.433. So far only replaced the K1 kit - haven't been able to find part numbers for K2 or B1.
On EPC, for my car, unfortunately there is no "spanner" icon on the similar page as on your post#17.
So I gather it must be an upgrade for the three specific 722 transmissions on the bulletin.
Best.
|
n/p benusa, always good to swap ideas around. i know mine is a 722.4 but not sure on the last two digits, next time on EPC will have a look.
That's an excellent document, very helpful.
I ended up sending one of the threads to MB parts guy, he then tracked down part numbers from that. It's a while back, but there should be a link earlier on in this thread to how this cross referencing was achieved, let me know if you can't find it.
If I were US based, might have opted for the aftermarket upgrade kits, you can then use their part diagrams and hopefully tech support.