Quote:
Originally Posted by Alec300SD
The boost sense line is the tube than runs from the intake manifold to the ALDA.
It is interrupted by the switchover valve that vents the pressure to the atmosphere when it receives an overboost electrical signal from wire coming from the intake manifold pressure switch (the pressure sensor on the intake manifold).
I've taken a higher resolution picture of what the FSM figure was trying to show. Gotta love those grainy FSM closeups.   |
I'm trying to track the wire off the sensor which was depicted in attachment 1 of my thread starter. I appreciate the photo and had indeed saved a picture of that unit. To point out my error, the wiring appears to travel back through the firewall so I'll add it to my list of which wire to rob off this body and install on the SE.