View Single Post
  #18  
Old 03-15-2003, 09:05 PM
MikeM MikeM is offline
Registered User
 
Join Date: Apr 1999
Location: Cincinnati, OH, USofA
Posts: 139
210 Filter change

The glove box is a tough pull, once you get all the screws out.

Once the box comes out, unhook the light. No need to remove it.

There is a white clip holding the cover to the filter. It unlocks from the bottom. Once you get it off,and remove the black cover you will see the dirty filters.

The instructions come with the new filter, if your not sure.

Cost is around $20.00 for replacement. Don't neglect.

TIP: After putting in the first filter and sliding it over in place. Put a little lubricant on the edge of the foam of the second filter, before sliding it in. It will go in easier and won't hang on the first filter.


Mike Mullins

97 E320
Reply With Quote