Quote:
Originally Posted by jjtaras
Chad:
Can you tell me how you managed to get the seat backs out of the car in the first place? There is conflicting information on the internet. Do I need to remove the plastic covers on the inside sides of the seat backs and then remove the three big phillips head screws? It looks like there is also a small bracket on the outside of each seatback.
You probably don't have pictures of the removal, but if you can tell me how it's done I'd greatly appreciate it.
Thanks,
Jeffrey
|
If I'm remembering correctly, I believe I had to use two wrenches to remove a bolt holding the center of the seats to a bracket on the floor. Then there are snap rings holding the outer sides of the seat in the brackets there. Once the rings are removed the seats can slide side to side a bit to get them out of the brackets and out of the car.