Quote:
Originally Posted by lsmalley
So what's the difference between my set up and the stock fan set up which uses the same sensor to control the fan? Also, this is where I got the resistor information from: K6JRF Auto Page so not sure why it wouldn't work.
 |
He's right, your relay is not going to work with a sensor, you need an ON/OFF switch. The resistor mod works because the stock fan setup is controlled by the tempmatic unit which is a lot more than just a relay. Heres how I did it on my old 2.6.
Here's how to properly setup a fan relay if you're doing it from scratch. The light and manual switch are optional.
