|
I pulled a reflector out of the stash. There's a bush on the edge of the reflector that's intact. I assume this material is the same as what was used for the adjusters. Pretty thick walled stuff. OD is about 8.5mm. Diameter of the holes the bushes fit into is about 8.0mm.
The adjusting pins are still attached to this reflector. They're just like the one you pictured, Rick76, tapering back from the tip.
When pushing the pins through the new bushes a little silicone grease would help ease the process. With the right hose you won't need any silicone sealer/caulk for things to hold.
|