Quote:
Originally Posted by 97 SL320
If power is applied across the parking switch for example, there will be little to rebuild as all of the smoke will have leaked out of the switch. If you can't find a good wiring diagram that shows internal connections, take it apart and draw one.
|
The wiring diagram and terminal connections are shown in the BBB. I suppose to be useful I would need to say what the other terminals of the switch go to so that the original poster has some chance of success. I suspect (but not sure) that one of the terminals on the switch is +12V switched, but I would need to check. The terminals on both the motor assembly and the switch are numbered (I think).