My local dealer wants to charge me $250 for a scan so I decided I could throw a few parts at it for a lot less. I started with a good $50 door control module. However, when I disassembled the panel I noticed there was a 2-wire connector that was not connected. There is a socket on the module for a 2 wire connector but it's a slightly different shape and the loose connector won't fit, (see photo below).
I know the door panel is wrong as it's a different color than the rest and the inner door pull is a different shape. I've been looking for one since I got the car but haven't been able to locate one the right color.
Is it possible the connector that isn't connected could be what is keeping the driver door window from working correctly?
I also discovered that the windows will not roll down using the remote. Is this probably part of the same problem?
Finally, is there someone in northern Illinois that could do an SDS for me at a more reasonable price?
Thanks!
