Quote:
Originally Posted by Mike Murrell
Mine does not contain an allen bolt. Plain hex bolt - see part #56 in diagram. You loosen that first; then loosen/tighten #41. Once belt is snug tighten #56
Already mentioned, but I'll reinforce. Be prepared to replace the tensioner. They do not last long and the more you loosen/tighten, the sooner they lose all ability to hold belt tension.
A terrible design.
|
I think I now understand. I've have a look in the morning. Hopefully I can get through this by just loosening, and then tightening the tensioner adjuster.
Thanks everyone for your help.