use a right angle drill and you don't have to remove the condenser. drill off the head like i suggested in my previous post (which apparently went un-read)......if you don't have air use one of these>>
 http://www.ebay.com/itm/Milwaukee-3-8-Close-Quarter-Angle-Drill-0370-20-New/112388383348?_trksid=p2045573.c100505.m3226&_trkparms=aid%3D555014%26algo%3DPL.DEFAULT%26ao%3D1%26asc%3D41376%26meid%3Dd682b24936164d9685a419333 f849783%26pid%3D100505%26rk%3D1%26rkt%3D1%26
i also have a brand new viscous clutch (and a used one or six) if you happen to wreck the old one in the process
Quote:
Originally Posted by taeandji
Can i use tap wrench to drill the hole and use one of thouse retractor bit from hanson or neiko?
If so, what size of drill bit do i need to use for that m10 bolt?
|
__________________
0o==o0
James 4:8
"...let us put aside the blindness of mind of those who can conceive of nothing higher than what is known through the senses"
-Saint Gregory Palamas, ---Discourse on the Holy Transfiguration of Our Lord God and Savior Jesus Christ
Centrally located in North East Central Pa.
|