Thread: setting engine at TDC
View Single Post
  #15  
Old 05-09-2017, 01:59 AM
taeandji taeandji is offline
Registered User
  
Join Date: Mar 2004
Posts: 33
Quote:
Originally Posted by duxthe1 View Post
If the cams aren't timed and you cant turn the engine then you are binding on the valves. Attempting to continue turning will bend valves.

If you can turn the engine to 40 degrees BTDC you should be able to move the cams until they are close, then go to TDC and time the engine.
That's what i was suspected and afraid force to turn.... and break something...
I will look into cams in the morning.

Thanks.
Reply With Quote