Quote:
Originally Posted by spock505
From the above thread, courtesy ah kay:
"The second pin is recessed. Located just above the vacuum pump. Do NOT butcher up the thread. You cannot punch it out like the top pin. Use some brake cleaner to clean the thread well. Use the washer and bolt extraction method again. Hope it helps."
|
The upper pin was not threaded on the outside, it is smooth. So, I made a little puller and it slowly came out. (I did use some spray liquid wrench.)
Isn't the lower pin smooth on the outside also?
I sprayed some liquid wrench on it; I'll let it set overnight and try using the same puller method as I did on the top one; assuming it is smooth; held in by tightness.