Mcmaster is a bit high if you already know where to go for a bittenpiece, but if you don't they have it, and you will in a couple three days, tops. If you pick metric it'll show you all the DIN circlips, and its probably just a matter of matching the picture and shaft/groove OD and thickness.

https://www.mcmaster.com/#circlips/=18d4wpo

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?