Quote:
Originally Posted by crazy4diesel
I don't think it's the wrong forum, but pictures of what you are describing would help. if it's under any part of the rubber seal, you need to remove the window to really remedy the problem.
|
Thanks, I also posted in the body forum but couldn't delete this post.
Anyway, its pouring rain today so no pictures. I'm out of garage space so I put a tarp over the car for now.
I managed to get the lower chrome trim piece off the rear quarter window after reading some posts. It came off pretty easy. There is a dime sized hole{after me poking with a small screwdriver} that is right in the bend of the window recess in the body. Its at the bottom corner right where the lower trim piece ends. Not too bad and it doesn't go under the rubber seal at all. It seems like an easy fix with a dremel and some rust inhibiter/sealer and bondo.
I would like to take the rest of the window trim off the quarter window but couldn't get it to move at the top. I removed the three screws around the trim but didn't want to force it until I do some more research.