|
If the pin that the head slides onto is not perpendicular to the shaft, that might be the problem. You might see this assembly flexing or feel binding or load in the assembly as you move it through it's travel. If it's sheet metal, I'd bend it with some big pliers. If it's a casting, I'd be nervous.
__________________
CC: NSA
All things are burning, know this and be released.
84 Benz 300D
82 Benz 300TD
13 Benz GLK 350
You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone.
www.kiva.org It's not like there's anything wrong with feeling good, is there?
|