Quote:
Originally Posted by Diseasel300
Are you needing front or rear hardware? The part number above is for the REAR brakes. The front Bendix hardware looks similar to the ATE, but has a different spring clip and different pins. They are NOT interchangeable.
My car has a Bendix on the left (probably original) and ATE on the right (probably reman). My brake pads came with ATE hardware, but not Bendix. I got lucky and my hardware was still clean and reusable.
|
Front
Quote:
Originally Posted by tyl604
Did you forget to put a cotter key in the retaining pin after you reinstalled the caliper? Do not see how it could come out if you did.
The ATE caliper pin does not have a hole for a cotter key. The pin just presses in and holds.
|
A cotter pin never came with the remans.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily
1992 Mercedes 300D 2.5 202,000 - Pure junk
2000 Mercedes E320 Black - 136,000 miles - Needs repair
Don't forget to grease the screw and threads on the spring compressor.
|