1986 300e with 5-speed

Trying to reconnect vacuum hoses after having the engine out for over a year and I cannot for the life of me remember where they go. Any help would be most welcome. I have the following spots where they could connect.

Cylinder Head: single thermal valve with two outlets
Intake Manifold: Three here, I know one gets capped cause no Automatic trans, one goes to firewall for HVAC and Economy gauge, but there is a 3rd toward the front drivers side.

Throttle Body: Two here.

Ignition Module: On the fender wall, there is a spot here.

Fuel Pressure Regulator: One here.

Air filter to Valve Cover: One here.

Fender: There is also a vac line running from the drivers-side fender that connects somewhere on the motor.

__________________
1984 280E