Originally Posted by Zulfiqar

you will definitely need to change the grease seal, If you are very careful you can save the caps - but one wrong blow and you puncture them.

Any disc brake wheel bearing grease works excellent - the MB green stuff is the same as any valvoline/castrol/shop brand - disc brake wheel bearing grease you can buy at a parts store - the only difference is that its a bright minty green rather than a pretty red.

The real issue will be to set the clearance on the bearings - if you are oldschool and have been in practice of this job, it will be a no brainer, if you are not then use a dial gauge or get someone to set the preload for you.

Make sure to use about 60 to 70 grams of grease per wheel as the FSM tells you to do.[/QUOTE]

I have an awful sense of humor to day. When I read that I pictured the Police kicking a Door down and finding a Scale with a blob of Grease on it and them thinking it might be some new narcotic.