View Single Post
  #7  
Old 09-28-2018, 03:33 PM
jay_bob's Avatar
jay_bob jay_bob is offline
Control Freak
 
Join Date: Oct 2011
Location: Columbia, SC
Posts: 3,942
That is correct. The blower speed decision is made by the regulator and then the command passed to the blower controller. This switches different resistors on the line to change the fan speed.

On the 124/later 126 this was done by a solid state device yielding infinite speed control and greater efficiency.
__________________
The OM 642/722.9 powered family
Still going strong
2014 ML350 Bluetec (wife's DD)
2013 E350 Bluetec (my DD)

both my kids cars went to junkyard in 2023
2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles)
2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles)

1998 E300DT sold to TimFreeh
1987 300TD sold to vstech
Reply With Quote