Quote:
Originally Posted by mmiller
Frank,
I probably should have mentioned it earlier, but may also replace the pump seal. I suspect there will be bolts holding the primary pump housing in place. Torque value?
Thanks,
MM
|
If the front seal is not leaking, it may be well to leave it. While not difficult to R&R, it would best be done without removing the front cover of the trans, as the bolts that retain the pump in the front cover come from the inside. A double hook puller is indicated in the literature.
Should you choose to remove the front cover, the torque for the cover-to-main case bolts is: ~9-10 lbft.
The pump-to-cover bolt torque is: ~15 lbft.
A fresh gasket for the front cover will help.